InBio160 PoE Bundle
IP-Based Advanced Access Control Panel
Overview
InBio160 carries out the matching of fingerprints on the panels. The FR Series of readers transmit fingerprint templates to InBio160 via RS-485 for fast and accurate matching with templates stored in a data-base.
In this bundle, the PoE splitter can offer 12V 2A DC for both InBio160 and one 12V DC lock. On the input side, just need connect the splitter to a PoE switch.
Function
 | Choice of ReadersFull range of card readers supported. ZK KR-Series readers are stylish and waterproof. InBio supports any wiegand-output reader, including HID Prox, iClass, and XceedID |  | CommunicationInBio controllers installed easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery function make the setting and modification of network parameters direct and easy. |
 | Lowest Total Cost of OwnershipInBio controller firmware can be upgraded in the field. New controller features can be loaded without any advanced tools, extending and expanding the value of |  | Capacity10,000 events and transactions. Controller is |
 | Door Control and MoreAlong with relay contacts for controlling door locks, easily programmable auxilary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking | OptionsInBio controllers come in three sizes to suit project needs and reduce the cost of unused capacity. 1-door, 2-door, and 4-door models can be mixed and matched in an optimized system architecture. |
Advanced Access Control Built-InAnti-Passback, First-Card Opening, Multi-Card Opening, Duress Password Entry, and Auxilary Input/Output Linkages are built |  | For Software DevelopersFree SDK is available for integrators and OEM’s to integrate the InBio controllers with their or existing security or personnel management applications.Upon request, ZK can also customize InBio firmware to meet any custom requirements. |
Technical Specifications
| User Capacity | 30,000 |
| Fingerprint Capacity | 3000 |
| Event Buffer | 100,000 transactions |
| Communication | RS485, Ethernet |
| Nominal Voltage | 12V |
| Standby Current | 50mA |
| Operating Temperature | 0 °C – 45 °C |
| Operating Humidity | 20% ~ 80% |
| Number of Doors Controlled | 1 |
| Number of Readers Supported | 2 |
| Aux. Input | 1 |
| Aux. Output | 1 |
| Types of Readers Supported | 26-bit Wiegand, others upon request |
| Number of Inputs | 2 (Exit Device and Door Status) |
| Number of Outputs | 2 (One Form C relay for lock and one Form C relay for Aux. output) |
| Weight | 3.35kg |
| Dimensions (Bundle Only) | 305.2 x 298.4 x 89 mm (Length*Width*Thickness) |
| Dimensions (Board Only) | 183mm x 106mm |
Specification of POE Splitter
| Maximum Power | 15.4W (IEEE 802.3af); 25.5W (IEEE 802.3at) |
| Input Voltage | 36-57V |
| Output Voltage | 12V |
| Network Standards | IEEE802.3i 10 BASE-T IEEE802.3i 100 BASE-TX IEEE802.3x flow control IEEE802.3af/ IEEE802.3at |
| Working Temperature | 0 °C ~ 45 °C |
| Interface Protection | Meet the IEC61000-4-2 (ESD) ± 15KV (air), ± 8KV (contact) requires Able to withstand 8/20us 24A (12A) energy |
| Input | an input RJ45 interface |
| Output | an output RJ45 connector and a DC output interface |
| Data Transfer Rate | 10/100/1000 Mbps |
| The Maximum Transmission Distance | 100m |
Configuration Diagram
ZKTeco Hong Kong
